Adding Muliple IP Address for Windows

  • Check IP using ipconfig /all

  • Use this command below for Adding Multiple IP Addresses at Once


  • FOR /L %A IN (2,1,6) DO netsh interface ipv4 add address “Local Area Connection” 174.139.66.%A 255.255.255.248
  • Explanation:

    Start = 2 means IP Address will start from 174.139.66.2

    Step = 1 means 4th octet will add +1 to 174.139.66.2 (the next IP will be 174.139.66.3 and keep adding 1 in last octet)

              End = 6 means IP Address will end at 174.139.66.6
  • replace “Local Area connection” with

  • And the command should look like this.

  • Press enter to run the command

  • IPconfig to check and it is done

 

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Related content

Knowledge Base Krypt

Veeam vCloud Connect Quick Guide

Veeam Cloud Connect User Guide Go to Backup Infrastructure > Service Providers > Add Service Provider 2. Add VPLS Veeam

Knowledge Base Krypt

IP test for each Datacenter

Lax10IP Standard Network: 67.229.79.250IP Premium Network: 98.126.41.162IP CN2-GIA Network: 98.126.229.2 SIN1IP Standard Network: 43.252.120.130IP Premium Network: 103.233.82.251 SV7IP Premium Network: